With the passing of the rainy season and the arrival of the dog days, August officially entered the "hottest day in history". The temperature continued to rise, not only testing the physical fitness of employees, but also testing the safety …
The "Jinling Evaporation Concentration Automation Control Software V1.0" and "Jinling Drying System Automation Control Software V1.0" independently developed by Jiangsu Jinling Drying Technology Co., Ltd. have been reviewed by the …
working principleThe hot air enters the annulus at the bottom of the drying chamber in a tangential direction from the inlet pipe and rises spirally. At the same time, the material is added into the tower by the feeder and fully heat exchanged with th…
After the unremitting efforts and dedication of our installation and commissioning personnel, the installation, adjustment and acceptance of the horizontal boiling dryer of a polymer technology Co., Ltd. in Huangshan was finally successfully completed…
The paddle dryer is a low-speed agitated dryer with a stirring paddle set inside the equipment to make the wet material fully contact the heat carrier and the hot surface under the agitation of the paddle to achieve the drying effect. The structure of…
working principle:After filtering and heating, the air enters the air distributor on the top of the dryer, and the hot air enters the drying chamber evenly in a spiral shape. The material liquid passes through the high-speed centrifugal atomizer at th…
The paddle dryer is a low-speed stirring dryer with conduction heating. A jacket is set on the dryer barrel, and a hollow blade is set on the hollow shaft, and a heat carrier is passed into it. The wet material is fully heat exchanged between the barr…
Principle: The two asymmetric spirals in the DSH series of conical mixer barrels automatically lift the material upwards, and the rotating arm revolves slowly; the material outside the spiral enters the stud to varying degrees, so as to achieve …